Alternative Views:

List Price: $149.99
Our Price: $119.99
Savings: $40.00

Quantity in Stock:Backorder
Availability:: Usually Ships in 24 to 48 Hours
Product Code: SRCT6200

Power Supply:

Description Warranties
SKYRC has done it again!! What you are looking at is the T6200 Touch Screen Charger!!! It has an output of 200 Watt, with this formula Amps = Watt / Volt, you can charge a 22.2V battery with 9~10A output or 11.1V battery at 18A. This is super fast for a charger of this size!! (You will need a good DC power supply of course!). About the hardware: it is proven that SKYRC always uses good quality transformers and IC's inside their chargers. If they say it has 200 Watt, it really has 200 Watt. They also put some thought into keeping it cool. There are two smart fans on the back that draws cool air from the rear and vents the hot air to the front to create circulation. Score for SKYRC!

The T6200 is a high-tech computerized charger, it has a detailed log for the battery you are charging, it will show graphs and data on the screen. Cool ain't it? Better yet, the T6200 has different ports to connect servos and Sensored Motors!! It is a Servo Tester, a Motor RPM Tester (Sensored Motor) and a Battery Monitor!!! Thanks to the big LCD screen, it shows you the parameters clearly, and you can change the settings by just touching the screen. For high end users, you can buy the SKYRC PC Connection Kit and connect the T6200 to a PC computer. Using the "Charge Master" software you will gain full control of the charger and more detailed graphs. These features will impress RC enthusiasts and seasoned veterans alike. 

Key Features:

Small charger with quick charging time
200 Watt output means you can charge a 11.1V 2200mah in about 10-13 minutes if you use 10A to charge. (Remember, too large charging Amps will shorten battery's life span.)

Finally, a touch screen charger from SKYRC
We like SKYRC chargers because of the good quality, now it has a Touch Screen for better using experience.

Four different kinds of Balance Plug on the same board, that's the first!
Every battery brand has their own standard balance plug, SKYRC put them on the same board, that's convenient.

You need to connect a external DC power supply (PSU)
Using a 20A PSU would be nice for the T6200.

Proudly made by SKYRC
AHK sources the best quality products and we are the official dealer of SkyRC products in Canada

Like all professional charger, this charger require a separate power supply.  Bundle a power supply and SAVE!

Bundle a Electrify 12V 12A Power Supply for ONLY $154.99
Bundle a Trakpower 12V 25A Power Supply for ONLY $189.99

This charger is GENUINE SkyRC product.  Don't be fooled by imitation!

  • Input Voltage: DC 11-18V
    Controls: Color LCD Touch Screen
    Display Type:65.85*49.63mm graphic touch sensitive LCD 3.2"(320*240 dot) screen and four color theme
    Display Backlight:White
    PC Communications: USB port for PC Control & Firmware Upgrade
    Case Material: Plastic
    Cooling System: Built in, two 40*40*10mm fans
    Case Size: 140*165*60mm
    Weight: 560g
    External Port: Temperature Probe Socket, DC Input, Balance Socket-XH, USB port for PC, Brushless Motor Sensor
                           Port, Servo/ESC Port, USB 5V/1A
    Delta Peak Detection: NiCd: 3-15mV/cell
                                       NiMH: 3-15mV/cell
    Charge Cutoff Temperature: 20-80°C (adjustable)
    Charge Voltage: NiCd/NiMH: Delta peak detection
                              LiPo: 4.18-4.3V/cell
                              LiIon: 4.08-4.2V/cell
    Balance Current: 200mA/cell
    Reading Voltage Range: 0.3-5.0V/cell
    Battery Types/Cells: NiCd/NiMH: 1-15cells
                                    LiPo/LiIon/LiFe: 1-6cells
                                    Pb: 2-20V
    Battery Capacity Range: NiCd/NiMH: 100-20,000mAh
                                           LiPo/LiIon/LiFe: 100-20,000mAh
                                           Pb: 100-20,000mAh
    Charge Current: 0.1-12.0A
    Safety Timer: 1-720 minutes, Off
    Charge Wattage: 200W
    Discharge Current: 0.1-5.0A(±10%)
    Discharge Cut-off Voltage: NiCd/NiMH: 0.1-1.1V/cell
                                              LiPo: 3.0-3.3V/cell
                                              LiIon: 2.9-3.2V/cell
    Discharge Wattage: 40W
    Balance Cells: 6 cells
    Memory: 5 different charge/discharge profiles
    Charge Method: CC/CV for lithium types and lead (pb) batteries, Delta-peak Sensitivity for NiMH/NiCd.

Our Price: $99.99
Our Price: $54.99

Share your knowledge of this product. Be the first to write a review »